Loading...
Remove Text Formatting

Likes Likes:  0
Results 1 to 7 of 7

Thread: Gooseneck to Back Bumper Clearance

  1. #1
    Member Laffs's Avatar
    Join Date
    Mar 2014
    Location
    Windsor, ON
    Posts
    4,651

    Gooseneck to Back Bumper Clearance

    Anyone here running a gooseneck trailer? Wondering what the back bumper to gooseneck ball clearance is needed. We have a 16' flatbed F550 we'd like to tow a 20' dump trailer with, just want to make sure I have enough clearance off the flatbed.
    Quote Originally Posted by ludacris View Post
    I'm Supercharged with the HideAway License Plate

  2. #2
    Member
    Join Date
    Apr 2014
    Location
    Bayfeild
    Posts
    5,115
    I could be wrong but I think the 550 would come with the frame ready to accept a goose neck hitch. Might be able to get the measuments from the frame mounts?

  3. #3
    Member Laffs's Avatar
    Join Date
    Mar 2014
    Location
    Windsor, ON
    Posts
    4,651
    Yeah I measured off the stock mounting points like 6' to back of the deck. Guess I need to go measure the trailers we're looking at to see what the tongue spread is on them.
    Quote Originally Posted by ludacris View Post
    I'm Supercharged with the HideAway License Plate

  4. #4
    Club Supporter hammerhead's Avatar
    Join Date
    Jun 2018
    Location
    Melancthon,Ontario, Canada
    Posts
    2,861
    11607-curt-bent-plate-gooseneck-trailer-hitch[1].jpg

    They come adjustable... might be what you need?
    Gerry's Junk...
    1979 Pace Car 302 4spd
    1981 Cobra t-top option - power to be determined, in the works

  5. #5
    Club Supporter hammerhead's Avatar
    Join Date
    Jun 2018
    Location
    Melancthon,Ontario, Canada
    Posts
    2,861
    hitch.jpg ^^^^^
    Gerry's Junk...
    1979 Pace Car 302 4spd
    1981 Cobra t-top option - power to be determined, in the works

  6. #6
    Member
    Join Date
    Apr 2014
    Location
    Bayfeild
    Posts
    5,115
    Quote Originally Posted by Laffs View Post
    Yeah I measured off the stock mounting points like 6' to back of the deck. Guess I need to go measure the trailers we're looking at to see what the tongue spread is on them.
    sorry. you want the measurements from the trailer. duh my bad. lol I would assume they are a standard length. but you know what they say about assuming.

  7. #7
    Member
    Join Date
    Apr 2014
    Location
    Bayfeild
    Posts
    5,115
    quick search seems like they are all over the place between 90" and 99".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service