Good call, yea they aren’t too loud until they get a year old or 15k or so on them, just keep up on the rotations and you should be fine.
Loading...
|
Good call, yea they aren’t too loud until they get a year old or 15k or so on them, just keep up on the rotations and you should be fine.
My duratracs were extremely loud after 10k or so.. vibrations started at around 20k
Felt like a new truck when I put the Falkens on.
'88 LX
Did you read the mixed reviews regarding complaints about internal bump stops (or am I thinking another brand??).
Air Lift 1000 on my own truck, leaking like a fawker at under 2yrs old. Same results two others I know with them.
Also on the internal bump stop/factory jounce bumper removal. I think a lot folks misunderstand the "5psi minimum" in the instructions. If you go a bit further it explains that unladen you can go 0psi, 5psi is the minimum loaded pressure. 5psi in these raised the back of my truck 1", would surely ride stiffer as a result.
(EDIT)
Load Lifter 5000 Utlimates have an internal bump stop (like a timbren) these are just the standard 5000's so assuming should ride like nothings there when no psi in bags.
Good to know.
Will likely opt for the 1000HD on my next go round.