Planning to install a roots blower on my 306. Trying to find information on proper venting and catch can location, type and quantity
Sent from my iPhone using Tapatalk
Loading...
|
Planning to install a roots blower on my 306. Trying to find information on proper venting and catch can location, type and quantity
Sent from my iPhone using Tapatalk
Last edited by 1986stangfan; 01-07-2020 at 11:31 PM.
I would think the catch can would replace the pvc system and could be mounted anywhere - also research and good quality oil with a high heat threshold and sheer factor, with 8 - 10 quarts...sounds like a cool build!
Gerry's Junk...
1979 Pace Car 302 4spd
1981 Cobra t-top option - power to be determined, in the works
STrongly suggest build a proper closed system.
I've seen hot rod guys pretty much mount them anywhere (firewall inner quarter) a good accessible area and some even just vent to the atmosphere... shh! - but that's not always the best - others may chime in but the real key is good oil with a high heat threshold and keep crank case pressure down - is this on the Maverick...?
Gerry's Junk...
1979 Pace Car 302 4spd
1981 Cobra t-top option - power to be determined, in the works
We use an inline valve similar to this from McMastercarr (sorry don't recall part number).