Gotcha. Should I be installing new springs while I'm in there? This motor will be seeing plenty of redline.
Loading...
|
Gotcha. Should I be installing new springs while I'm in there? This motor will be seeing plenty of redline.
It would be well advised.
BTW here's my jank shit with these cams
https://www.youtube.com/watch?v=9Hdy7ClmreI
I would install These Comp Cam Springs 26125-16 , not the 26113-16 (these are only slightly above stock spring rate).
Keep in mind you will need the spring compressor special tool just for these 4.6/5.4l motors and will have to use a regulated air supply
that will be blowing air through the spark plug to keep the valve in its fully closed position while changing the springs....lots of youtube videos and literature on the web. Working on these motor takes some motor skills...just a FYI...
OR just install the cams without springs.....
Little 2V 700+ RWHP, Pump Gas
10.46 sec @ 136 mph