2V Cams? What is the best?

[Laffs]

I have 262AH in my car. Reason for it was I always found the 2V to really lack low end grunt and I assumed at the time I'd be going with a Centri-blower one day so power band would be even more peaky. When I installed the cams 9-10 years ago they were the best off the shelf option that didn't sacrifice down low power but provided a decent bump on the top end. Hindsight being what it is I wish I would have gone a bit more aggressive on the cam selection and instead ran a Positive Displacement blower.

[Zippy]

I have 262AH in my car. Reason for it was I always found the 2V to really lack low end grunt and I assumed at the time I'd be going with a Centri-blower one day so power band would be even more peaky. When I installed the cams 9-10 years ago they were the best off the shelf option that didn't sacrifice down low power but provided a decent bump on the top end. Hindsight being what it is I wish I would have gone a bit more aggressive on the cam selection and instead ran a Positive Displacement blower.

Did you ever have your car tuned ? Be interested in your power gains with that cam. I assume stock PI heads?
Did you do valve springs or just slam them in?

[Laffs]

Did you ever have your car tuned ? Be interested in your power gains with that cam. I assume stock PI heads?
Did you do valve springs or just slam them in?

Street tuned with cams. Never dyno'd cam only. Stock heads and internals.

[Zippy]

Street tuned with cams. Never dyno'd cam only. Stock heads and internals.

Send me vid of it running
pleaseeeeeeeeeeeeeeeeeeee

[Laffs]

[Zutz2v]

I have 262AH in my car. Reason for it was I always found the 2V to really lack low end grunt and I assumed at the time I'd be going with a Centri-blower one day so power band would be even more peaky. When I installed the cams 9-10 years ago they were the best off the shelf option that didn't sacrifice down low power but provided a decent bump on the top end. Hindsight being what it is I wish I would have gone a bit more aggressive on the cam selection and instead ran a Positive Displacement blower.

If you could switch the cam as your car is now would you choose a different option ? ( in the middle of my build ) might consider a different cam.


Sent from my iPhone using Tapatalk