Going to clay bar for the first time

[1986stangfan]

Hello, I am going to do a full clay bar on my car for the first time. I am looking for tips and tricks, to make sure that I don't do any damage. I am then going to polish and wax the whole car, would also appreciate tips for those steps. I am super picky and am terrified of swirl marks and scratches.

Thanks everyone


Sent from my iPhone using Tapatalk

[Stephen06GT]

If you drop the clay bar, toss it. Other than that, was the car thoroughly before claying and make sure to keep the surface wet with either spray detailer or soapy water. When done claying wash and dry the car again and you're done.

[1986stangfan]

If you drop the clay bar, toss it. Other than that, was the car thoroughly before claying and make sure to keep the surface wet with either spray detailer or soapy water. When done claying wash and dry the car again and you're done.

Thanks, I'm super nervous.

[Stephen06GT]

Practice on a daily driver first.

[allicedout]

Thanks, I'm super nervous.

Don't be nervous, like Stephen said don't drop the clay bar and keep the surface well lubricated. I always use a detailing spray to keep it wet and lubricated, its what the kits you buy buy from Canadian Tire and other places will come with. And don't be nervous, your not sanding the paint or anything, just removing dirt. Good luck and have fun!

[1986stangfan]

It turned out amazing!!!! I spent 4 hours doing clay bar, pre wax cleaner and polishing the car by hand today. I still want to polish a little more and then do a couple of good coats of wax.