PDA

View Full Version : Opinion on Husky 20 Gallon aircompressor.



mavrrrick
09-14-2018, 10:25 AM
My air compressor from CT crapped and want to buy a new one today (I hope) not impressed with the CT one, not that old and didn't use a tonne. Considering Husky. Opinions or recommendation please.

Snaketamer
09-14-2018, 10:42 AM
I've been looking also, after my compressor crapped out. Although it still runs, not sure how long it will keep going as the cheapo plastic cooling fan exploded and I can't source a new one cuz the manufacturer went tits up.

Home Depot sells Califorina Air Tools and I'm kinda partial to their 2hp/10gal model. Reviews seem pretty good. Only problem is you have to order it in.
https://www.homedepot.ca/en/home/p.10020c-ultra-quiet---oil-free--20-hp-100-gal-steel-tank-air-compressor.1001031835.html

https://www.aircompressorscout.net/wp-content/uploads/CaliforniaAir-Tools10020c.jpg

RedSN
09-14-2018, 10:57 AM
Depends what you are using it for. Pumping up tires, impact wrench, sanders, etc.
PSI is almost irrelevant to CFM. How much air are you using?

Oil-lubricated pump is always going to be better than oil-less ones. A lot quieter too. But more expensive.

I actually run 2 compressors. A larger Pacific Ranger for the big jobs, and a little Dewalt nailer compressor for smaller jobs. To be honest, the small compressor get more use.

mavrrrick
09-14-2018, 11:17 AM
Looking at the Kobalt 2 hp electric now ... pricey though....hmmmm

mavrrrick
09-14-2018, 11:25 AM
Husky 30 gallon looks ok. wish someone could chime in who used these ones.

hammerhead
09-14-2018, 11:39 AM
like redsn said - if you need big force you need a good compressor - most of the cheaper ones are good for nail guns and airing tires - if you want to removed stubborn bolts with a 1/2 inch or better impact gun you will be out of luck - how long they will last who knows...if you want to power tools some of the rechargeable tools are good most young guys use them now and no compressor required. you can also get electric impacts with good force to removed wheel nuts.

ZR
09-14-2018, 11:43 AM
You will also extend the life of your portable comp considerably if it's stored inside during the winter, uber hard on them firing up in the extreme cold.
Yes electric impact guns have come a very long way in the last few years, insane power compared to the glorified toys of not so many years ago.

True Blue
09-14-2018, 12:16 PM
You will also extend the life of your portable comp considerably if it's stored inside during the winter, uber hard on them firing up in the extreme cold.

^^^ X2! Plus draining the tank after every use, helps in keeping the tank from rusting out.

mavrrrick
09-14-2018, 01:53 PM
Its always in the garage, but don't use much in the winter. Thinking of going oil filled this time around. Looks like better unit and quieter.

5.4MarkVIII
09-14-2018, 02:11 PM
Found out the hard way that it’s well worth the money to buy a good compressor up front. I spend enough on crap that wouldn’t do the job it would have been cheaper just to get the good one up front.

mavrrrick
09-14-2018, 02:24 PM
^^thats how I’m thinking now, 2 compressors later !!


Sent from my iPhone using Tapatalk

Scrape
09-14-2018, 04:07 PM
I use a small oil compressor from Canadian Tire now for about 8 years and does the job for light duty crap. As for impacting bolts or wheels I wouldn’t recommend it. I just use it to blow out leave from the gutter, grass from the mowers and water from the cracks and grille of my car. If I had to do it again definitely a bigger tank and higher CFM one would be a big plus and oiled of course is a must.

5.4MarkVIII
09-14-2018, 05:07 PM
check out Kijiji and stuff, wheh it was time for me to up grade, scored a 2 hp 40 gallon unit barely used for 500 bucks

Scrape
09-14-2018, 05:35 PM
That’s a decent deal right there.

mavrrrick
09-14-2018, 06:21 PM
Decided on this one... way more than I wanted to spend.
https://uploads.tapatalk-cdn.com/20180914/7746d13b09b6fe29656e821b91bcdc7a.jpeg


Sent from my iPhone using Tapatalk

True Blue
09-14-2018, 11:48 PM
Mavrrrick,

Lowe's is having a "stay up and save" event right now, ends at 5am. Save 20% on purchases over $150. Now would be the time to make the buy, for that compressor.

mavrrrick
09-15-2018, 07:40 AM
Crap.... buying it this morning
Think it’s scratch and save though. 15% to free.

Sent from my iPhone using Tapatalk

RedSN
09-15-2018, 09:31 AM
Not sure who makes the Kobalt units, but it looks a lot like the CH. looks like a decent unit, should serve you well.


Edit: remove the stock air filter and replace with a Solberg, makes a noticeable difference in noise reduction.

mavrrrick
09-15-2018, 07:18 PM
Not sure who makes the Kobalt units, but it looks a lot like the CH. looks like a decent unit, should serve you well.


Edit: remove the stock air filter and replace with a Solberg, makes a noticeable difference in noise reduction.

Where can I get said filter?


Sent from my iPhone using Tapatalk

RedSN
09-16-2018, 09:26 AM
I just got mine off amazon.

https://photos.smugmug.com/Garage-Project/i-jx49FDd/0/a017c74a/S/image_zps20edbc73-S.jpg

mavrrrick
09-17-2018, 12:08 PM
Got it at 15% off :highfive:

Speedtospare
09-18-2018, 08:12 PM
https://i.ytimg.com/vi/Ja_cb_gfDDk/maxresdefault.jpg Owned this model for ever. Works great

ZR
09-19-2018, 07:37 AM
Another thing all too often overlooked, changing comp oil at least once a year + regularly draining water out of the air tank.

RedSN
09-19-2018, 08:29 AM
Owned this model for ever. Works great
https://scontent.fosu1-1.fna.fbcdn.net/v/t1.0-9/41715316_548460815620116_2595738170523910144_n.jpg ?_nc_cat=1&oh=368cfd240a3ccf4d739b004be0c542ce&oe=5C1D3FB2

mavrrrick
10-01-2018, 09:31 AM
Not sure who makes the Kobalt units, but it looks a lot like the CH. looks like a decent unit, should serve you well.


Edit: remove the stock air filter and replace with a Solberg, makes a noticeable difference in noise reduction.

There are several... which one is best?


Sent from my iPhone using Tapatalk