X cam push rods

[4GOTNPNY]

Hey guys I have a 302 I’m putting tighter stock block stock bottom end with a girdle. It’s and x cam with edelbrock e street heads yes the pistons are fly cut just want to know what push rods length I should be using if anyone has used this setup before

[ZR]

Adjustable push rod checker to determine correct length is a must, be a fluke if stock work out right.


https://cdn1.bigcommerce.com/server5600/95e3f/products/195/images/1648/6.00-7.10__36468.1344115712.1280.1280.JPG?c=2