PDA

View Full Version : Spring rates for 2017



Whitehot
01-21-2023, 07:24 AM
I ve got a 2017 PP1 and wondering about spring rates that car came with from factory , and what spring rate/shock combo would be a decent upgrade??

ZR
01-21-2023, 09:01 AM
If it was mine, Ford Racing PP1 springs for your car combined with Koni S/A shocks n struts (or Bilstein). I would also do rear vertical links (delrin plus bearing only) at the same time. Contrary to the internet experts, they will not increase noise or screw the ride and provide a huge upgrade over poly or stock version.

https://www.cjponyparts.com/media/catalog/product/cache/41573c7cc04735120df5cb9016ff5ad7/b/m/bmrtca046_1.126_1.jpg

RedSN
01-21-2023, 01:11 PM
Last time I saw that car at the track it was running circles around me. I’d say the current setup spring/shock is pretty damn good.

Whitehot
01-21-2023, 01:30 PM
RedSN Maybe it was the driver?? ;) lol , I m hopin to make it to Track Days !! The car came with some shocks and springs, but I m not sure, should check them out what exactly they are , soon !!

RedSN
01-21-2023, 02:08 PM
I have no doubt the driver was a major factor. My philosophy is upgrade the parts that your skills have exceeded, …or broken LOL
I’d be shocked if the car didn’t already have a set of Koni

ZR
01-21-2023, 05:18 PM
You shocked...........Koni or Bilsteins Don?

fast Ed
01-21-2023, 05:19 PM
RedSN Maybe it was the driver?? ;) lol , I m hopin to make it to Track Days !! The car came with some shocks and springs, but I m not sure, should check them out what exactly they are , soon !!

You got a Ford Performance spring set that lowers about an inch and stiffens things up a bit, and a set of Koni SA struts / shocks. I had picked those because the street ride wouldn't be too harsh but it would tighten things up enough for track use. If you give those a go I think that you would be satisfied.

Whitehot
01-21-2023, 05:59 PM
Hey Ed , ya , I was just wondering and haven t gotten into some of the spare parts, prob get those installed in the spring... gettin excited :) ... I ve already done a resonator delete , tune and installed the steering wheel :) :) !!

fast Ed
01-21-2023, 06:09 PM
I have no doubt the driver was a major factor. My philosophy is upgrade the parts that your skills have exceeded, …or broken LOL
I’d be shocked if the car didn’t already have a set of Koni

Don, while in my hands the only mods were a set of adjustable front strut mounts to add some camber, the lighter squared wheel & tire set, and the Roush mufflers which the first owner had done. Otherwise all stock 2017 PP1.