Should I port and polish my new heads?

[jibbijib]

So should he port and polish his heads? Or buy more shiny parts?

Also want to hear the reasoning behind speed density cams. Inquiring mind.

I would think it wouldn't hurt to at least polish the heads.

But hopefully someone can answer about porting.

I also want to add, answer based on the parts he listed. Don't start telling him to change everything. .

[toofast306]

Definitely do a port match to the largest gaskets available, regardless of head brand/model. You can do this with the valve train installed. Same for the lower intake.
Polishing the combustion chamber can be beneficial, particularly if the valves are out, but I wouldn't bother if you don't want to pull the valves for that.

[86 t-tops]

I've checked the lower intake ports against the head ports... Head ports are larger so I don't believe I need to do any port matching...

And yes, would rather avoid taking the valves off the heads if I'm not doing any porting...

Thanks