What's your Fox H/C/I combo

[1BAD92LX]

What are you guys using on a stock 302 block
Gimme injector size, MAF size and TB size if you don't mind

[Tailites]

injector...42#s

Maf...76 mm

TB...65 mm

[tulowd]

none of the above.....780 cfm carb, lol

if I do go EFI (really big IF) it would be some kind of standalone system like Holley Pro or MSD or FAST

[Slope]

Iron GT-40's untouched save for a resurface and a valve job
Stock '85-'88 roller cam
'96-'97.5 Ford Explorer upper/lower

19lb. 4 hole F0TE Bosch
70mm '94/'95 OEM SN-95
67mm '96-97.5 OEM Ford Explorer

[90GT]

Iron windsor jrs fully worked
TFS track heat ported wafer thin
custom grind cam
80mm maf
75mm tb
24lb injectors

[92redragtop]

Actually on a 306 (stock 5.0 block)

1. AFR 165 aluminium heads - stud mount
2. FRPP E-303 cam
3. Edelbrock Performer 5.0 intake

Injectors: FRPP 42 lb
MAF: SCT 90mm MAF BA-2600
TB: Accufab 75mm throttle body with their 75mm throttle body spacer

[RedSN]

Actually not on the 302

Edelbrock Performer Intake
Edelbrock Performer 1.90/1.60 Heads
FRPP 1.60 rockers
FRPP E-303 cam
65mm Throttle Body
75mm Pro M MAF
24 lb Injectors
Walbro 255 LPH Fuel Pump
High Flow Oil Pump
Powerbond SFI Balancer

[Stephen06GT]

Actually not on the 302

Edelbrock Performer Intake
Edelbrock Performer 1.90/1.60 Heads
FRPP 1.60 rockers
FRPP E-303 cam
65mm Throttle Body
75mm Pro M MAF
24 lb Injectors
Walbro 255 LPH Fuel Pump
High Flow Oil Pump
Powerbond SFI Balancer

I'm gonna have to do some work to Ol Paint if I want to keep up with all that.

[jibbijib]

your avatar says otherwise.

I wonder who took that picture and where it was taken...

I'm gonna have to do some work to Ol Paint if I want to keep up with all that.

I don't think you need to be worried.... Unless his garage floor sprouts wheels...

[Uncle Buck]

Won't give any extra ponies installed on the garage floor. Lol

Nice floor by the way.