Loading...
Remove Text Formatting

Likes Likes:  48
Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 47

Thread: Proper torque

  1. #31
    Member Laffs's Avatar
    Join Date
    Mar 2014
    Location
    Windsor, ON
    Posts
    4,566
    Quote Originally Posted by Ghost Rider View Post
    ^^^why is the arrow pointing to 500 Nautical Miles?
    Need to rotate it pretty far to hit the torque spec.
    Quote Originally Posted by ludacris View Post
    I'm Supercharged with the HideAway License Plate

  2. #32
    Mustang Occasionally
    Join Date
    Mar 2014
    Location
    At my home.
    Posts
    2,843
    Quote Originally Posted by RedSN View Post
    Nm = Newton meter
    NM = nautical mile
    nm = nanometer
    (^^^ engineer post)

  3. #33
    BRAAAAAAAAAAAPPPPPPPPPPP jibbijib's Avatar
    Join Date
    Mar 2014
    Location
    Brampton
    Posts
    1,524
    Chordless impact gun with 800 ft lbs torque. Crank the nuts on and rattle for a good 30 seconds each lug.


    Quote Originally Posted by Intmdtr View Post
    if he can pull out and pass a Honda civic, that thing is modded in my books.
    Quote Originally Posted by Not4You
    I know how to blow trannies!

  4. #34
    Member bluetoy's Avatar
    Join Date
    Mar 2014
    Location
    Ottawa
    Posts
    1,196
    Quote Originally Posted by Rich-C View Post
    I go to 90 ft.lbs for my non posrche vehicles. 100 ft.lbs always gives me trouble come following tire change.

    That won't cut it on an f150. The spec is 150ft/lbs. Must be a little Porsche in f150's

  5. #35
    Super Moderator Scrape's Avatar
    Join Date
    Mar 2014
    Location
    GT-A
    Posts
    9,264
    VW/Audi torque specs are 85ft/lbs when I last checked.

  6. #36
    Member
    Join Date
    Apr 2014
    Location
    Huntsville
    Posts
    134
    For what it's worth, 500 Nm is 368 Lb/ft.

  7. #37
    Member Mellow Yellow's Avatar
    Join Date
    Mar 2014
    Location
    Stoney Point
    Posts
    1,065
    In August a guy on Kennedy Rd in Brampton lost a wheel from his Toyota van, it rolled 300 feet and found the front of my 1990 Nissan 300 ZX.

    Can you imagine if someone was walking along and got hit by this run away wheel!

  8. #38
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,746
    Some years back, younger sister was hit by wheels off the rear of a transport trk. The full size 70's Pontiac Parisienne she was driving, front end and roof unrecognizable it was so badly mangled plus car shoved some distance off the road.

  9. #39
    Member 98 Snake's Avatar
    Join Date
    Mar 2014
    Location
    oshawa
    Posts
    297
    I've come across so many loose wheels now that when I road test and hear the noise I already know what it is. There's no mistaking something is wrong and people just keep driving .
    Most cars use 12mm/1/2 nuts I tighten to 100 ft lbs
    Trucks 14mm / 9/16 140 ft lbs

  10. #40
    Member 98 Snake's Avatar
    Join Date
    Mar 2014
    Location
    oshawa
    Posts
    297
    The stock cobra wheels from my car show evidence of being driven with the wheels loose

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service