So I worked through the right side of the block (facing to the front of the block) following the gap location instructions from the ring manufacturer. This is my first time doing this...

Now I'm moving onto the left side and had a quick thought after installing one piston. I was only provided one example for the gap locations and nothing indicates that you flip or mirror the gaps.

In other words, if I follow the one example provided using the top ring gap as a reference point, the top ring gap will be closer to the lifter valley on one side of the block and further away from the lifter valley on the other side of the block.

Is this right? Just wondering... again I've never done this before.

Thanks