Loading...
|
1990 LX Notch & 1992 LX Notch, 2002 GT Vert & 01 GT.
most bullits are 17x8 and they should fit but check the backspacing
Lol, those are SN95 V6 rims. You will be able to fit any 17x8 and 17x9 rims as long as front tires don't exceed 245's
Edit: those cobra reps that hot Ford has for sale would look killer on that black fox
"Without Warning, Without Conscience"
I know where there's some clean 10 holes
^^^yeah, was thinking they were the cobra wheels.
Regardless, they do look hideous on a Fox.
-Don____________
Lol John, those 10 holes are staying on that 84 for a bit. ( until I find some draglites) & even then I will keep them. Plus this fox has a 5 bolt conversion on it.
1990 LX Notch & 1992 LX Notch, 2002 GT Vert & 01 GT.
on a side note that looks like a clean fox hatch. Just what I like to see. What are the details on the car?
Saleen 89-373....long gone....!!
Agreed, I actually like them. Same size as a stock Bullitt wheel so likely the offset will be the same also. Although it looks like someone has spacers on the rear or stuffed a wider rear in there, so depending on the tire size and suspension you may end up with rubbing back there. What's in the front for 5-lug? Those are common because they can hide the wheel bearing cap if it's got Lincoln or Ranger 5-lug stuff.
it depends what was used for the conversion. If an svo or t-bird rear was used the wheels stick out 3/4 which could explain why the wheel on the OP's car look the way they do. Those saleen wheels you had on your black new edge would have looked great on this car. Blullet wheels will only fit if the front hubs are sn95.
Saleen 89-373....long gone....!!